MAYDAY BATTERY REMOVAL


  1. REMOVE ENGINE ROOM SIDE COVER LH


    1. Remove the 7 clips and engine room side cover LH.

      A01EN5SE01

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note


    • w/ Navigation System:

      After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY


    1. A01ESG6E01

      Place protective tape as shown in the illustration.

    2. Using a moulding remover, detach the 6 claws.

    3. Remove the end panel and disconnect the connectors and 3 clamps.

  4. REMOVE TELEMATICS TRANSCEIVER

    A01EOYP

    1. Disconnect the 5 connectors.

    2. Remove the 4 bolts and telematics transceiver with bracket.

  5. REMOVE MAYDAY BATTERY

    A01ERX8

    1. Remove the nut and No. 3 telephone bracket together with the mayday battery.

    2. A01EREX

      Disconnect the connector and remove the mayday battery.