G-BOOK SYSTEM, Diagnostic DTC:B15EF

DESCRIPTION

This DTC will be stored when either of the following conditions is met:

• The mayday ID is not detected in the nonvolatile memory for 5 minutes during the mayday ID confirmations that are performed every minute after the engine switch is turned on (ACC).

• The mayday ID stored in the multi-media module receiver assembly and the mayday ID stored in the telematics transceiver are different.

INSPECTION PROCEDURE

PROCEDURE

1. CHECK DEVICE

   
   

   1. Check the part replacement history.

      
      

      1. Check if the multi-media module receiver assembly or the telematics transceiver has been replaced in the past.

   2. Check the mayday ID.

      
      

      1. Enter diagnostic mode Click here.

      2. Select "Service Information" on the Service Menu screen.

         

      3. Select "DCM Information" on the Service Information screen.

         

      4. Check the mayday ID using the DCM Information screen.

         

   3. Contact the G-BOOK support center.

      
      

      1. Contact the G-BOOK support center and inform them about the following:

         
         

         • Replacement history of the multi-media module receiver assembly

         • Replacement history of the telematics transceiver

         • Mayday ID

         Tech Tips

         The G-BOOK support center will perform an investigation and provide the results.

      2. Perform the vehicle contract setting.

   
   

   NEXT

2. CLEAR DTC

   
   

   1. Clear the DTC Click here.

   
   

   NEXT

   END