TELEMATICS TRANSCEIVER INSTALLATION


  1. INSTALL NO. 2 TELEPHONE BRACKET


    1. Install the telephone bracket RH to the telematics transceiver with the 2 screws.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

    2. Install the telephone bracket LH to the telematics transceiver with the 2 screws.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

  2. INSTALL TELEMATICS TRANSCEIVER


    1. Install the telematics transceiver with bracket with the 3 screws.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

    2. Connect the 4 connectors.

  3. INSTALL REAR CONSOLE END PANEL SUB-ASSEMBLY


    1. A01EQRB

      Connect the connectors and 3 clamps.

    2. Attach the 6 claws to install the end panel.

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  5. INSTALL ENGINE ROOM SIDE COVER LH


    1. Install the engine room side cover LH with the 7 clips.

  6. CHECK SRS WARNING LIGHT


    1. Check the SRS warning light Click here.

  7. PERFORM REGISTRATION


    1. Perform registration Click here.

      Note

      When replacing the telematics transceiver, perform registration.