G-BOOK SYSTEM TERMINALS OF ECU


  1. TELEMATICS TRANSCEIVER

    A01ESHSE01
    Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
    P2-1 (+B) - P2-4 (E) G - W-B Battery Engine switch off 11 to 14 V
    P2-2 (SPI+) - P2-4 (E) W - W-B Sound signal Audio system playing A waveform synchronized with sound is output.
    P2-3 (SPI-) - P2-4 (E) B - W-B Sound signal Audio system playing A waveform synchronized with sound is output.
    P2-4 (E) - Body ground W-B - Body ground Ground Always Below 1 Ω
    P2-5 (SPO+) - P2-4 (E) W - W-B Sound signal Emergency call mode A waveform synchronized with the received voice is output.
    P2-6 (SPO-) - P2-4 (E) B - W-B Sound signal Emergency call mode A waveform synchronized with the received voice is output.
    P2-7 (IG2) - P2-4 (E) B - W-B Power source (IG) Engine switch on (IG) 11 to 14 V
    Engine switch off Below 1 V
    P2-8 (ACC) - P2-4 (E) GR - W-B Accessory (ON) Engine switch on (ACC) 11 to 14 V
    Engine switch off Below 1 V
    P2-11 (IND1) - P2-4 (E) L - W-B Emergency call switch red indicator illumination signal For 5 seconds after turning the engine switch on (ACC) 1 to 8.5 V
    Engine switch off Below 1 V
    P2-12 (IND2) - P2-4 (E) P - W-B Emergency call switch green indicator illumination signal For 5 seconds after turning the engine switch on (ACC) 1 to 8.5 V
    Engine switch off Below 1 V
    P2-13 (BBI-) - P2-4 (E) L - W-B Mayday battery power supply - -
    P2-17 (MUTE) - P2-4 (E) B - W-B MUTE Signal Audio system playing 3.5 V or higher
    Emergency call mode Below 1 V
    P2-18 (MCO+) - P2-4 (E) G - W-B Microphone voice signal

    See "Microphone&Voice Recognition Check" Click here

    		A waveform synchronized with the input voice.
    P2-19 (MCO-) - P2-4 (E) R - W-B Microphone voice signal

    See "Microphone&Voice Recognition Check" Click here

    		Below 1 Ω
    P2-20 (CTR1) - P2-4 (E) B - W-B Mayday battery control line - -
    P2-21 (CTR2) - P2-4 (E) V - W-B Mayday battery control line - -
    P2-24 (GSW) - P2-4 (E) L - W-B Airbag deployment signal Engine switch on (IG)

    Pulse generation

    (Refer to waveform 1)
    P2-26 (SIG-) - P2-4 (E) L - W-B Ground Always Below 1 V
    P2-27 (SIG1) - P2-26 (SIG-) W - L Emergency call switch condition signal Emergency call switch not pressed 1.7 V
    Emergency call switch pressed 1 V
    P2-30 (BBI+) - P2-4 (E) R - W-B Mayday Battery Power Supply - -
    P2-32 (SGND) - P2-4 (E) Shield - Body ground Shield ground Always Below 1 Ω
    P2-33 (MCVD) - P2-4 (E) W - W-B Telephone microphone assembly power supply Engine switch on (ACC) 5 V
    Engine switch off Below 1 V
    P2-34 (MCI+) - P2-4 (E) B - W-B Microphone voice signal

    See "Microphone&Voice Recognition Check" Click here

    		Synchronized with the voice wave.
    P2-35 (MCI-) - P2-4 (E) R - W-B Microphone voice signal

    See "Microphone&Voice Recognition Check" Click here

    		Synchronized with the voice wave.
    P3-1-1 (USB-) B USB communication line - -
    P3-1-2 (USB+) B USB communication line - -
    P3-1-3 (USBS) B USB communication line - -
    P3-2 (USBG) - Body ground W - Body ground Shield ground Always Below 1 V
    P3-3 (VOT+) - P2-4 (E) W - W-B Receive voice signal Receiving a call while using the operator service A waveform synchronized with the received voice is output.
    P3-4 (USBV) - P2-4 (E) W - W-B Telephone microphone assembly power supply Engine switch on (ACC) 4.75 to 5.25 V
    Engine switch off Below 1 V
    P3-5 (VOT-) - P2-4 (E) R - W-B Receive voice signal Receiving a call while using the operator service A waveform synchronized with the received voice is output.
    P3-6 (VOR-) - P2-4 (E) B - W-B Sent voice signal Calling while using the operator service A waveform synchronized with the sent voice is output
    P3-7 (VOR+) - P2-4 (E) G - W-B Sent voice signal Calling while using the operator service A waveform synchronized with the sent voice is output

    1. Oscilloscope waveform:


      1. A01EOJ2E01

        Waveform 1

        Item Condition
        Tester Connection P2-24 (GSW) - P2-4 (E)
        Tool setting 5.0 V/DIV., 20 ms/DIV.
        Vehicle condition Engine switch on (IG)

  2. MULTI-MEDIA MODULE RECEIVER ASSEMBLY Click here