HARD DISK DRIVE INSTALLATION


  1. INSTALL HARD DISC


    1. A01EOV7

      Push the hard disc in the direction of the arrow shown in the illustration to install it.

    2. A01ERBV

      Install the cover in the direction of the arrow shown in the illustration.

    3. Install the 2 screws.

  2. INSTALL NO. 2 RADIO BRACKET


    1. Install the No. 2 radio bracket with the 3 bolts.

      Torque:
      3.0 N*m  { 30 kgf*cm, 26 in.*lbf }

  3. INSTALL MULTI-MEDIA MODULE RECEIVER ASSEMBLY WITH BRACKET

    Click here

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  5. INSTALL ENGINE ROOM SIDE COVER LH


    1. Install the engine room side cover LH with the 7 clips.