HARD DISK DRIVE REMOVAL


  1. REMOVE ENGINE ROOM SIDE COVER LH


    1. Remove the 7 clips and engine room side cover LH.

      A01EN5SE01

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note


    • After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE MULTI-MEDIA MODULE RECEIVER ASSEMBLY WITH BRACKET

    Click here

  4. REMOVE NO. 2 RADIO BRACKET


    1. A01EOW5

      Remove the 3 bolts and No. 2 radio bracket.

  5. REMOVE HARD DISC


    1. A01EPRX

      Remove the 2 screws.

    2. A01ENH9

      Move the cover in the direction of the arrow shown in the illustration to remove it.

    3. A01EN33

      Remove the hard disc in the direction of the arrow shown in the illustration.