MULTI-DISPLAY (w/ Navigation System) INSTALLATION


  1. INSTALL NO. 1 RADIO RECEIVER BRACKET


    1. Install the No. 1 radio receiver bracket with the 3 bolts.

      Torque:
      3.0 N*m  { 30 kgf*cm, 26 in.*lbf }

  2. INSTALL MULTI-DISPLAY ASSEMBLY WITH BRACKET


    1. Connect the connectors.

    2. A01EQSD

      Insert the multi-display assembly with bracket and attach the 2 claws and 4 clips on its backside.

      Note

      When inserting the multi-display assembly, do not press the knobs on it.

    3. A01EQ6OE01

      Install the multi-display assembly with the 2 screws and 2 bolts.

      Torque:
      for bolts labeled A
      12 N*m  { 122 kgf*cm, 8 ft.*lbf }

  3. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY


    1. A01EN5R

      Attach the 5 claws to install the register.

  4. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY


    1. A01ER8Q

      Attach the 5 claws to install the register.

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  6. INSTALL ENGINE ROOM SIDE COVER LH


    1. Install the engine room side cover LH with the 7 clips.