DIGITAL AUDIO BROADCASTING ANTENNA REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note


    • w/ Navigation System:

      After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE ROOF HEADLINING ASSEMBLY


    1. Remove the roof headlining Click here.

  3. REMOVE NO. 2 REAR ROOF AIR DUCT


    1. A01EPRB

      Remove the 2 clips and remove the duct.

  4. REMOVE NO. 5 REAR ROOF AIR DUCT


    1. A01EOTC

      Remove the 2 clips and remove the duct.

  5. REMOVE NO. 4 REAR ROOF AIR DUCT


    1. A01EQ7M

      Remove the 2 clips and remove the duct.

  6. REMOVE NO. 3 REAR ROOF AIR DUCT


    1. A01EOHV

      Remove the clip and remove the duct.

  7. REMOVE NO. 1 REAR ROOF AIR DUCT


    1. A01ERO4

      Remove the 3 clips and remove the duct.

  8. REMOVE DIGITAL AUDIO BROADCASTING ANTENNA ASSEMBLY


    1. Disconnect the connector and remove the 2 bolts.

      A01ER55

    2. Detach the 7 clamps and remove the digital audio broadcasting antenna.