STEREO JACK ADAPTER ASSEMBLY INSTALLATION


  1. INSTALL REMOTE CONTROL ADAPTER ASSEMBLY


    1. A01ESKN

      Install the adapter with the 2 screws.

  2. INSTALL REAR CONSOLE END PANEL SUB-ASSEMBLY


    1. A01EQRB

      Connect the connectors and 3 clamps.

    2. Attach the 6 claws to install the end panel.

  3. INSTALL NO. 1 STEREO JACK ADAPTER ASSEMBLY


    1. A01ESM9

      Attach the 2 claws to install the stereo jack adapter.

  4. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. A01ENG7

      Connect the connectors.

    2. Attach the 13 claws to install the console panel.

  5. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A01ENTE

      Twist the shift lever knob in the direction indicated by the arrow and remove it.

  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  7. INSTALL ENGINE ROOM SIDE COVER LH


    1. Install the engine room side cover LH with the 7 clips.