RADIO ANTENNA CORD REMOVAL


  1. REMOVE ENGINE ROOM SIDE COVER LH


    1. Remove the 7 clips and engine room side cover LH.

      A01EN5SE01

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE ROOF HEADLINING ASSEMBLY


    1. Remove the roof headlining assembly Click here.

  4. REMOVE ANTENNA CORD SUB-ASSEMBLY


    1. Detach the 2 clamps and remove the antenna from the 3 ribs and notch on the rear of the roof headlining.

      A01ENYF

    2. Remove the antenna cord from the roof headlining.

    3. Remove the double-sided tape from the roof headlining.

  5. REMOVE INSTRUMENT PANEL SAFETY PAD ASSEMBLY


    1. Remove the instrument panel safety pad Click here.

  6. REMOVE ANTENNA CORD SUB-ASSEMBLY


    1. Detach the 7 clamps and remove the antenna cord.

      A01EPYL