INSTRUMENT PANEL SPEAKER REMOVAL

Tech Tips


  • Use the same procedures for the LH side and RH side.

  • The procedures listed below are for the LH side.


  1. REMOVE ENGINE ROOM SIDE COVER LH


    1. Remove the 7 clips and engine room side cover LH.

      A01EN5SE01

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY


    1. A01ER8Q

      Detach the 5 claws and remove the register.

  4. REMOVE NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY


    1. A01EN5R

      Detach the 5 claws and remove the register.

  5. REMOVE MULTI-DISPLAY ASSEMBLY WITH BRACKET


    1. A01EQ6O

      Remove the 2 screws and 2 bolts.

    2. A01EQJV

      Pull the multi-display assembly with bracket to detach the 2 claws and 4 clips on the backside of the multi-display assembly.

    3. Disconnect the connectors and remove the multi-display assembly.

  6. REMOVE NO. 1 SPEAKER OPENING COVER ASSEMBLY


    1. A01EQBQ

      Detach the 7 clips and remove the opening cover.

  7. REMOVE FRONT NO. 4 SPEAKER ASSEMBLY


    1. Remove the 2 bolts.

    2. Remove the speaker and disconnect the speaker connector.

      Note

      Do not touch the cone part of the speaker.

      A01ES23E01

  8. REMOVE FRONT ASSIST GRIP SUB-ASSEMBLY

    A01EPTJ

    Tech Tips

    Use the same procedure to remove the front assist grip on the other side.


    1. Detach the 4 claws and remove the 2 assist grip plugs.

    2. A01EQ8Y

      Remove the 2 bolts.

    3. Detach the 2 claws and remove the front assist grip.

  9. REMOVE FRONT PILLAR GARNISH LH

    A01ENLZ

    1. Detach the clip and 3 guides.

    2. Disconnect the speaker connector and then remove the front pillar garnish.

    3. A01EO6AE01

      Protect the curtain shield airbag.


      1. Thoroughly cover the airbag with a cloth or nylon sheet and fix the ends of the cover with adhesive tape, as shown in the illustration.

        Note

        Cover the curtain shield airbag with a protective cover as soon as the front pillar garnish is removed.

  10. REMOVE NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY


    1. A01EQWI

      Detach the claw and clip on the near side. Then, raise the panel towards the front of the vehicle in the direction of the arrow and detach the 2 claws to remove the panel.

  11. REMOVE FRONT NO. 2 SPEAKER ASSEMBLY


    1. Remove the 2 bolts.

    2. Remove the speaker and disconnect the speaker connector.

      Note

      Do not touch the cone part of the speaker.

      A01EPM0E01