LUGGAGE SPEAKER INSTALLATION


  1. INSTALL NO. 1 WOOFER BOX SPEAKER ASSEMBLY


    1. Install the box speaker with the 5 bolts.

    2. A01ENTM

      Connect the connector.

  2. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH

    A01EN0H

    1. Attach the 4 claws to install the quarter trim cover.

    2. Install the 7 screws.

  3. INSTALL REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedures described for the LH side.

  4. INSTALL REAR STEP COVER

    Tech Tips

    Use the same procedure to install the step cover on the other side.


    1. A01EQ9D

      w/o Illumination Type Front Door Scuff Plate:

      Attach the 2 claws to install the step cover.

    2. A01EQ94

      w/ Illumination Type Front Door Scuff Plate:

      Attach the 4 claws to install the step cover.

  5. INSTALL REAR FLOOR MAT REAR SUPPORT PLATE

    A01EQA6

    1. Attach the 6 clips and 4 claws to install the support plate.

  6. INSTALL REAR NO. 2 SEAT ASSEMBLY

    Install the rear No. 2 seat assembly Click here.

  7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  8. INSTALL REAR NO. 2 SEAT HINGE COVER RH

    A01EN8L

    1. Attach the 3 claws and 2 clips to install the cover.

  9. INSTALL REAR SEAT CUSHION HINGE COVER RH


    1. A01EN36

      Attach the 3 claws to install the cover.

    2. Return the seat to the upright position.

  10. INSTALL ENGINE ROOM SIDE COVER LH


    1. Install the engine room side cover LH with the 7 clips.