PILLAR SPEAKER (for Front Side) REMOVAL


  1. REMOVE ENGINE ROOM SIDE COVER LH


    1. Remove the 7 clips and engine room side cover LH.

      A01EN5SE01

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE FRONT ASSIST GRIP SUB-ASSEMBLY

    A01EPTJ

    Tech Tips

    Use the same procedure to remove the front assist grip on the other side.


    1. Detach the 4 claws and remove the 2 assist grip plugs.

    2. A01EQ8Y

      Remove the 2 bolts.

    3. Detach the 2 claws and remove the front assist grip.

  4. REMOVE FRONT PILLAR GARNISH LH

    A01ENLZ

    1. Detach the clip and 3 guides.

    2. Disconnect the speaker connector and then remove the front pillar garnish.

    3. A01EO6AE01

      Protect the curtain shield airbag.


      1. Thoroughly cover the airbag with a cloth or nylon sheet and fix the ends of the cover with adhesive tape, as shown in the illustration.

        Note

        Cover the curtain shield airbag with a protective cover as soon as the front pillar garnish is removed.

  5. REMOVE FRONT NO. 3 SPEAKER ASSEMBLY


    1. A01EO22

      Detach the 3 claws and remove the speaker.