MULTI-DISPLAY (w/o Navigation System) REMOVAL


  1. REMOVE ENGINE ROOM SIDE COVER LH


    1. Remove the 7 clips and engine room side cover LH.

      A01EN5SE01

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY


    1. A01ER8Q

      Detach the 5 claws and remove the register.

  4. REMOVE NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY


    1. A01EN5R

      Detach the 5 claws and remove the register.

  5. REMOVE MULTI-DISPLAY ASSEMBLY WITH BRACKET


    1. A01EQ6O

      Remove the 2 screws and 2 bolts.

    2. A01EQJV

      Pull the multi-display assembly with bracket to detach the 2 claws and 4 clips on the backside of the multi-display assembly.

    3. Disconnect the connectors and remove the multi-display assembly.

  6. REMOVE NO. 1 RADIO RECEIVER BRACKET


    1. A01EO5E

      Remove the 4 bolts and No.1 radio receiver bracket.