RADIO RECEIVER (w/ Multi-display) INSTALLATION


  1. INSTALL NO. 2 RADIO BRACKET


    1. Install the No. 2 radio bracket with the 3 bolts.

      Torque:
      3.0 N*m  { 30 kgf*cm, 26 in.*lbf }

  2. INSTALL NO. 1 RADIO BRACKET


    1. Install the No. 1 radio bracket with the 3 bolts.

      Torque:
      3.0 N*m  { 30 kgf*cm, 26 in.*lbf }

  3. INSTALL MULTI-MEDIA MODULE RECEIVER ASSEMBLY WITH BRACKET


    1. Connect the connectors.

    2. A01EPMR

      Insert the multi-media module receiver assembly with bracket to attach the 7 claws on its backside.

      Note

      When inserting the multi-media module receiver assembly, do not press the knobs on it.

    3. A01ENX6E01

      Install the multi-media module receiver assembly with the 2 screws and 2 bolts.

      Torque:
      for bolts labeled A
      12 N*m  { 122 kgf*cm, 8 ft.*lbf }

  4. INSTALL MULTI-DISPLAY ASSEMBLY WITH BRACKET


    1. Connect the connectors.

    2. A01EQSD

      Insert the multi-display assembly with bracket to attach the 2 claws and 4 clips on its backside.

      Note

      When inserting the multi-display assembly, do not press the knobs on it.

    3. A01EQ6OE01

      Install the multi-display assembly with the 2 screws and 2 bolts.

      Torque:
      for bolts labeled A
      12 N*m  { 122 kgf*cm, 8 ft.*lbf }

  5. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY


    1. A01ER8Q

      Attach the 5 claws to install the register.

  6. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY


    1. A01EN5R

      Attach the 5 claws to install the register.

  7. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    1. A01EQSF

      Connect the connectors.

    2. Attach the 8 claws to install the panel.

  8. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH


    1. A01EO0Q

      Connect the connector.

    2. Attach the 8 claws to install the panel pad.

  9. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH


    1. A01EP7O

      Attach the 9 claws to install the panel pad.

  10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  11. INSTALL ENGINE ROOM SIDE COVER LH


    1. Install the engine room side cover LH with the 7 clips.