RADIO RECEIVER (w/ Multi-display) REMOVAL


  1. REMOVE ENGINE ROOM SIDE COVER LH


    1. Remove the 7 clips and engine room side cover LH.

      A01EN5SE01

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH


    1. A01EO0Q

      Detach the 8 claws.

    2. Disconnect the connector and remove the panel pad.

  4. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH


    1. A01EP7O

      Detach the 9 claws and remove the panel pad.

  5. REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    1. A01EQSF

      Detach the 8 claws.

    2. Disconnect the connectors and remove the panel.

  6. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY


    1. A01ER8Q

      Detach the 5 claws and remove the register.

  7. REMOVE NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY


    1. A01EN5R

      Detach the 5 claws and remove the register.

  8. REMOVE MULTI-DISPLAY ASSEMBLY WITH BRACKET


    1. A01EQ6O

      Remove the 2 screws and 2 bolts.

    2. A01EQJV

      Pull the multi-display assembly with bracket to detach the 2 claws and 4 clips on the backside of the multi-display assembly.

    3. Disconnect the connectors and remove the multi-display assembly.

  9. REMOVE MULTI-MEDIA MODULE RECEIVER ASSEMBLY WITH BRACKET


    1. A01ENX6

      Remove the 2 screws and 2 bolts.

    2. A01ER3I

      Pull the multi-media module receiver assembly to detach the 7 claws on the backside of the multi-media module receiver assembly with bracket.

    3. Disconnect the connectors and remove the multi-media module receiver assembly.

  10. REMOVE NO. 1 RADIO BRACKET


    1. A01ER9L

      Remove the 3 bolts and No. 1 radio bracket.

  11. REMOVE NO. 2 RADIO BRACKET


    1. A01EOW5

      Remove the 3 bolts and No. 2 radio bracket.