BACK DOOR SPEAKER INSTALLATION


  1. INSTALL REAR HEADER SPEAKER ASSEMBLY


    1. A01EPI2

      Connect the connector.

    2. Install the speaker with the 3 screws.

      Note

      Do not touch the cone part of the speaker.

  2. INSTALL BACK DOOR GARNISH


    1. A01EQR4

      Attach the 14 clips to install the back door garnish.

  3. INSTALL BACK DOOR SIDE GARNISH LH


    1. A01ER4G

      Attach the 3 clips to install the back door side garnish.

  4. INSTALL BACK DOOR SIDE GARNISH RH


    1. w/o Power Back Door:

      Tech Tips

      Use the same procedures described for the LH side.

    2. w/ Power Back Door:


      1. A01EPSU

        Attach the clip and 2 claws to install the back door side garnish.

  5. INSTALL CENTER BACK DOOR GARNISH


    1. A01ERXU

      Attach the 5 clips and 2 claws to install the back door garnish.

  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  7. INSTALL ENGINE ROOM SIDE COVER LH


    1. Install the engine room side cover LH with the 7 clips.