BACK DOOR SPEAKER REMOVAL

Tech Tips


  • Use the same procedures for the LH side and RH side.

  • The procedures listed below are for the LH side.


  1. REMOVE ENGINE ROOM SIDE COVER LH


    1. Remove the 7 clips and engine room side cover LH.

      A01EN5SE01

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE CENTER BACK DOOR GARNISH


    1. A01ERXU

      Detach the 5 clips and 2 claws, and remove the back door garnish.

  4. REMOVE BACK DOOR SIDE GARNISH LH


    1. A01ER4G

      Detach the 3 clips and remove the back door side garnish.

  5. REMOVE BACK DOOR SIDE GARNISH RH


    1. w/o Power Back Door:

      Tech Tips

      Use the same procedures described for the LH side.

    2. w/ Power Back Door:


      1. A01EPSU

        Detach the clip and 2 claws and remove the back door side garnish.

  6. REMOVE BACK DOOR GARNISH


    1. A01EQR4

      Using a screwdriver, detach the 14 clips and remove the back door garnish.

  7. REMOVE REAR HEADER SPEAKER ASSEMBLY


    1. A01EPI2

      Remove the 3 screws.

    2. Disconnect the connector and remove the speaker.

      Note

      Do not touch the cone part of the speaker.