REAR DOOR SPEAKER INSTALLATION

Tech Tips


  • Use the same procedures for the LH side and RH side.

  • The procedures listed below are for the LH side.


  1. INSTALL REAR NO. 3 SPEAKER ASSEMBLY (for 19 Speakers)


    1. A01EPX6E01

      Align the speaker to the door position pins labeled A.

    2. Install the speaker with the 2 screws.

      Note

      Do not touch the cone part of the speaker.

    3. Attach the clamp and connect the connector.

  2. INSTALL REAR NO. 2 SPEAKER ASSEMBLY (for 19 Speakers)


    1. A01ESNNE01

      Align the speaker to the door position pins labeled A.

    2. Install the speaker with the 4 screws.

      Note

      Do not touch the cone part of the speaker.

    3. Connect the connector.

  3. INSTALL REAR SPEAKER SET


    1. Temporarily install the speaker by attaching the claw of the speaker to the door panel.

    2. Install the speaker with the 3 screws.

      Note

      Do not touch the cone part of the speaker.

    3. Connect the connector.

      A01EPDOE01

  4. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY


    1. Connect the connector.

    2. A01EO2V

      Connect the rear door lock remote control cable assembly LH and rear door inside locking cable assembly LH to the rear door inside handle sub-assembly LH.

    3. A01EP2J

      Attach the 4 claws and 11 clips to install the rear door trim board sub-assembly LH.

    4. Install the 2 screws.

  5. INSTALL REAR UPPER DOOR ARMREST BASE PANEL LH


    1. Connect the connector.

    2. Attach the 6 claws to install the rear upper door armrest base panel LH.

  6. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG LH


    1. Attach the 3 claws to install the rear door inside handle bezel plug LH.

  7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  8. INSTALL ENGINE ROOM SIDE COVER LH


    1. Install the engine room side cover LH with the 7 clips.