INSPECTION PROCEDURE
PROCEDURE
CHECK TELEVISION DISPLAY ASSEMBLY
Check whether only one of the television display assemblies does not turn on, or whether both television display assemblies do not turn on.
| Result | Proceed to |
|---|---|
| One of the television display assemblies does not turn on | A |
| Both television display assemblies do not turn on | B |
| B |
|
CHECK SYSTEM Click here |
| A |
|
CLEAN INFRARED RAY RECEIVING PORTION
Clean the infrared ray receiving portion on the television display assembly.
Check whether the same malfunction occurs.
| OK |
|---|
| The function returns to normal. |
| NG |
|
CHECK REMOTE CONTROLLER Click here |
| OK |
|
END
CHECK SYSTEM
Check that the remote control operation of the rear system is not locked by the multi-media module receiver assembly.
Check that "Rear System Lock" is Off on the "General Settings" screen.
| OK |
|---|
| "Rear System Lock" is Off. |
| NG |
|
RELEASE LOCK |
| OK |
|
CHECK REMOTE CONTROLLER (BATTERY)
Check that the dry-cell battery of the remote controller is not depleted.
| OK |
|---|
| Battery is not depleted. |
| NG |
|
REPLACE REMOTE CONTROLLER BATTERY |
| OK |
|
CHECK REMOTE CONTROLLER
Replace the remote controller with a new or normally functioning one.
Check that the television display assembly turns on.
| OK |
|---|
| The television display assembly turns on. |
| Result | Proceed to |
|---|---|
| OK | A |
| NG (for RH) | B |
| NG (for LH) | C |
| B |
|
REPLACE TELEVISION DISPLAY ASSEMBLY RH Click here |
| C |
|
REPLACE TELEVISION DISPLAY ASSEMBLY LH Click here |
| A |
|
END (REMOTE CONTROLLER IS DEFECTIVE)