REAR SEAT ENTERTAINMENT SYSTEM (for Seatback) A Remote Control System does not Operate

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK REMOTE CONTROL SYSTEM


    1. Check whether the remote control does not work for one of the television display assemblies, or does not work for both television display assemblies.

      Result
      Result Proceed to
      The remote control does not work for one of the television display assemblies A
      The remote control does not work for both of the television display assemblies B

    B

    CHECK SYSTEM Click here

    A

  2. CLEAN INFRARED RAY RECEIVING PORTION


    1. A01EPPC

      Clean the infrared ray receiving portion on the television display assembly.

    2. Check whether the same malfunction occurs.

      OK
      The function returns to normal.

    NG

    REPLACE REMOTE CONTROLLER Click here

    OK

    END

  3. CHECK SYSTEM


    1. A01EPHLE01
      Text in Illustration
      *1 Television Display Assembly
      *2 Multi-display Assembly

      Check that the remote control operation of the rear system is not locked by the multi-media module receiver assembly.


      1. Check if "Rear System Locked" appears on the television display.

        OK
        The message does not appear.

        Tech Tips

        If the rear system is locked and the remote control is used in the rear seat area, an operation not possible message (for example, "Rear System Locked") is displayed. If the message is displayed, enter the multi-display assembly settings screen and change "Rear System Lock" to Off.


    NG

    RELEASE LOCK

    OK

  4. CHECK REMOTE CONTROLLER (BATTERY)


    1. Check that the dry-cell battery of the remote controller is not depleted.

      OK
      Battery is not depleted.

    NG

    REPLACE REMOTE CONTROLLER BATTERY

    OK

  5. REPLACE REMOTE CONTROLLER


    1. Replace the remote controller with a new or normally functioning one.

    2. Check that the remote controller operates normally.

      OK
      The remote controller operates normally.

    NG

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here

    OK

    END (REMOTE CONTROLLER IS DEFECTIVE)