REAR SEAT ENTERTAINMENT SYSTEM (for Roof) Visual Mute Signal Circuit between Radio Receiver and Television Display

DESCRIPTION

This is the visual mute signal circuit from the multi-media module receiver assembly to the television display assembly.

WIRING DIAGRAM

A01EQ73E05

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK MULTI-MEDIA MODULE RECEIVER ASSEMBLY


    1. A01ERZGE05
      Text in Illustration
      *a

      Component with harness connected

      (Multi-media Module Receiver Assembly)

      Measure the voltage according to the value(s) in the table below.

      Standard Voltage
      Tester Connection Condition Specified Condition
      F77-4 (VMTR) - Body ground RSE is playing → Source is changed 4 V or higher → Below 0.7 V → 4 V or higher

    NG
    OK
  2. CHECK HARNESS AND CONNECTOR (MULTI-MEDIA MODULE RECEIVER ASSEMBLY - TELEVISION DISPLAY ASSEMBLY)


    1. Disconnect the F77 multi-media module receiver assembly connector.

    2. Disconnect the L61 television display assembly connector.

    3. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      F77-4 (VMTR) - L61-17 (VMTR) Always Below 1 Ω
      F77-4 (VMTR) - Body ground Always 10 kΩ or higher

    NG
    OK
  3. CHECK MULTI-MEDIA MODULE RECEIVER ASSEMBLY


    1. Disconnect the L61 television display assembly connector.

    2. A01EQJJE12
      Text in Illustration
      *a

      Front view of wire harness connector

      (to Television Display Assembly)

      Measure the voltage according to the value(s) in the table below.

      Standard Voltage
      Tester Connection Condition Specified Condition
      L61-17 (VMTR) - Body ground Display is operating 4 V or higher

    NG
    OK