MULTIPLEX TILT AND TELESCOPIC ECU REMOVAL


  1. REMOVE STEERING COLUMN ASSEMBLY (TILT STEERING GEAR ASSEMBLY WITH MOTOR)

    Tech Tips

    Refer to the instructions for removal of the steering column assembly Click here.

  2. REMOVE STEERING LOCK ACTUATOR ASSEMBLY


    1. Using a center punch, mark the center of the 2 tapered-head bolts.

    2. Using a 3 to 4 mm (0.118 to 0.157 in.) drill, drill a hole in the 2 bolts.

    3. A01EQOXE03

      Using a screw extractor, remove the 2 bolts and the steering lock actuator assembly from the steering column assembly.

  3. REMOVE MULTIPLEX TILT AND TELESCOPIC ECU

    A01EQGO

    1. Disconnect the 2 connectors.

    2. Remove the 2 screws and ECU.