STEERING WHEEL REASSEMBLY


  1. INSTALL TRANSMISSION SHIFT SWITCH ASSEMBLY

    A01EQWJE01
    Text in Illustration
    *1 Cable Tie
    *a 0 to 90°
    *b 1 to 3 mm (0.0394 to 0.118 in.)

    1. Pass the harness of the shift switch LH (-) through the holes of the lower steering wheel boss cover and attach the connector clamp.

    2. Connect the connector to the shift switch RH (+) and install a new cable tie to the switch at the location shown in the illustration to secure the wire in place.

    3. Attach the 4 guides.

  2. INSTALL STEERING WHEEL BOSS LOWER COVER (w/o Shift Paddle Switch)


    1. A01ENIC

      Attach the 2 claws to install the lower cover and install the 2 screws.

  3. INSTALL STEERING WHEEL BOSS LOWER COVER (w/ Shift Paddle Switch)


    1. A01ENMC

      Attach the 2 claws to install the lower cover and install the 4 screws.

  4. INSTALL STEERING PAD COVER (w/o Shift Paddle Switch)


    1. A01ESE6

      Install the steering pad cover with the 4 screws.

  5. INSTALL STEERING PAD COVER (w/ Shift Paddle Switch)


    1. A01ERWX

      Install the steering pad cover with the 4 screws.

  6. INSTALL STEERING WHEEL HEATER CONTROL ASSEMBLY (w/ Steering Heater)


    1. Install the controller with the 2 screws.

    2. Connect the 2 connectors.

  7. INSTALL STEERING SHAKE DAMPER


    1. A01EOU3

      Install the steering shake damper with the 2 screws.

  8. INSTALL CRUISE CONTROL MAIN SWITCH


    1. A01ERUP

      Install the cruise control main switch with the 2 screws.

    2. Connect the connector.

  9. INSTALL NO. 1 SWITCH WIRE


    1. Install the No. 1 switch wire with the screw.

    2. Connect the 2 connectors and attach the 5 guides to install the No. 1 switch wire.