PARKING BRAKE SYSTEM ADJUSTMENT


  1. INSPECT PARKING BRAKE LEVER TRAVEL


    1. Fully pull the parking brake lever to engage the parking brake.

    2. Release the lever to disengage the parking brake.

    3. Slowly pull the parking brake lever all the way, and count the number of clicks.

      Standard Parking Brake Lever Travel when Pulled with a Force of 200 N (20 kgf, 45 lbf)
      5 to 7 clicks

      If the parking brake lever travel is not as specified, adjust the parking brake shoe clearance and parking brake lever travel.

  2. REMOVE REAR WHEEL

  3. ADJUST PARKING BRAKE LEVER TRAVEL


    1. Remove the console cup holder box sub-assembly Click here.

    2. Completely release the parking brake lever.

    3. A01ENKT

      Loosen the adjusting nut to completely release the parking brake cable.

    4. Temporarily install the hub nuts.

    5. Remove the hole plug.

    6. A01EOAXE01

      Insert an adjustment tool into the adjustment hole of the disc. Rotate the adjustment wheel in the "X" direction until the shoes are locked. Then rotate the adjustment wheel in the "Y" direction 8 notches.

    7. Check that the disc can be rotated lightly. If not, rotate the adjustment wheel in the "Y" direction and check again.

    8. Install the hole plug.

    9. Remove the hub nuts.

    10. A01ENKT

      Turn the adjusting nut until the parking brake lever travel becomes correct.

      Standard Parking Brake Lever Travel when Pulled with a Force of 200 N (20 kgf, 45 lbf)
      5 to 7 clicks

    11. Operate the parking brake lever 3 to 4 times, and check the parking brake lever travel.

      Standard Parking Brake Lever Travel when Pulled with a Force of 200 N (20 kgf, 45 lbf)
      5 to 7 clicks

    12. Check whether the parking brake drags or not.

    13. When operating the parking brake lever, check that the brake warning light comes on.

      Standard Condition
      The brake warning light always illuminates at the first click.

    14. Install the console cup holder box sub-assembly Click here.

  4. INSTALL REAR WHEEL

    Torque:
    131 N*m  { 1336 kgf*cm, 97 ft.*lbf }