REAR BRAKE FLEXIBLE HOSE REMOVAL

Tech Tips


  • Use the same procedures for the LH side and RH side.

  • The procedures listed below are for the LH side.


  1. REMOVE REAR WHEEL

  2. DRAIN BRAKE FLUID

    Note

    Wash off brake fluid immediately if it comes in contact with any painted surface.

  3. REMOVE REAR FLEXIBLE HOSE LH


    1. A01ERBE

      Remove the union bolt and gasket, and then remove the flexible hose from the disc brake cylinder.

    2. A01ESN3E01

      Disconnect the brake tube from the flexible hose with a union nut wrench while holding the flexible hose with a wrench.

      Note


      • Do not bend or damage the brake tube.

      • Do not allow any foreign matter such as dirt and dust to enter the brake tube from the connecting point.

    3. Remove the clip.

    4. Remove the flexible hose.

  4. REMOVE REAR FLEXIBLE HOSE


    1. A01EO6HE01

      Disconnect each brake tube from the flexible hose with a union nut wrench while holding the flexible hose with a wrench.

    2. Remove the 2 clips.

    3. Remove the flexible hose.

    4. A01ENJNE01

      Disconnect each brake tube from the flexible hose with a union nut wrench while holding the flexible hose with a wrench.

    5. Remove the 2 clips.

    6. Remove the flexible hose.

  5. REMOVE NO. 6 FLEXIBLE HOSE BRACKET


    1. A01ENAG

      Remove the bolt and bracket from the rear axle housing.