REAR BRAKE REASSEMBLY


  1. INSTALL PISTON SEAL


    1. Apply lithium soap base glycol grease to a new piston seal.

    2. A01ERWH

      Install the piston seal to the disc brake cylinder.

  2. INSTALL CYLINDER BOOT


    1. A01ESAOE01

      Apply lithium soap base glycol grease to the piston and a new cylinder boot.

    2. Install the cylinder boot to the piston as shown in the illustration.

  3. INSTALL REAR DISC BRAKE PISTON


    1. A01EQ52

      Install the cylinder boot to the disc brake cylinder.

      Note

      Install the boot securely to the grooves of the disc brake cylinder.

    2. Push in the piston by hand and install the cylinder boot into the grooves of the piston.

      Note

      Install the boot securely to the grooves of the piston.

  4. TEMPORARILY INSTALL REAR DISC BRAKE BLEEDER PLUG


    1. Temporarily install the bleeder plug to the disc brake cylinder.

      Tech Tips

      The bleeder plug will be tightened to a torque specification in the "Bleed Brake Line" procedure.

  5. INSTALL REAR DISC BRAKE BLEEDER PLUG CAP