HIGH INTENSITY DISCHARGE HEADLIGHT BULB INSTALLATION

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. INSTALL DISCHARGE HEADLIGHT BULB


    1. A01EQNM

      Lock the set spring as shown in the illustration to install the discharge headlight bulb to the headlight unit.

      Note

      Do not touch the discharge headlight bulb glass.

  2. INSTALL HEADLIGHT GASKET


    1. Install a new headlight gasket to the headlight light control ECU sub-assembly LH.

  3. INSTALL HEADLIGHT LIGHT CONTROL ECU SUB-ASSEMBLY LH


    1. A01ESAB

      Turn the headlight light control ECU sub-assembly LH socket in the direction indicated by the arrow in the illustration to connect the headlight light control ECU sub-assembly LH socket.

      Note


      • Check that the headlight gasket is installed on the headlight light control ECU subassembly LH.

      • Check that the headlight gasket is not damaged or contaminated with foreign matter. If there is any damage, replace the headlight gasket with a new one.

      • Do not pull the headlight light control ECU sub-assembly LH with the socket connected.

    2. A01EQ71

      Turn the headlight light control ECU sub-assembly LH in the direction indicated by the arrow in the illustration to install the headlight light control ECU sub-assembly LH.

    3. Connect the connector.

  4. INSTALL BATTERY


    1. Install the battery.

    2. Connect cable to positive battery terminal.

  5. INSTALL BATTERY CLAMP SUB-ASSEMBLY


    1. Install the battery clamp sub-assembly with the bolt.

  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  7. INSTALL ENGINE ROOM SIDE COVER LH


    1. Install the engine room side cover LH with the 7 clips.