HEADLIGHT ASSEMBLY REMOVAL

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE FRONT BUMPER COVER

    Click here

  4. REMOVE FRONT FENDER MAIN SEAL LH


    1. A01ERY2

      Using a clip remover, detach the 3 clips and remove the fender main seal.

  5. REMOVE HEADLIGHT ASSEMBLY LH


    1. A01ESK3E01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the headlight assembly LH.

    2. Disconnect the connectors.

    3. Remove the 4 bolts and headlight assembly LH.