FOG LIGHT ASSEMBLY INSTALLATION

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. INSTALL FOG LIGHT ASSEMBLY LH


    1. Attach the 2 guides to install the fog light assembly LH.

    2. Install the 2 screws.

      Torque:
      1.8 N*m  { 18 kgf*cm, 16 in.*lbf }

    3. Connect the connector.

  2. INSTALL FRONT BUMPER INNER BRACKET (for RH Side)


    1. Attach the 3 claws to install the front bumper inner bracket.

  3. INSTALL FRONT BUMPER COVER

    Click here

  4. ADJUST FOG LIGHT AIMING

    Click here