WIPER SWITCH INSTALLATION

Tech Tips


  • Use the same procedures for LHD and RHD vehicles.

  • The procedures listed below are for LHD vehicles.


  1. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY


    1. A01ES7P

      Attach the claw to install the windshield wiper switch assembly.

    2. Connect the 2 connectors.

  2. INSTALL UPPER STEERING COLUMN COVER


    1. A01ERUT

      Attach the claw to install the upper steering column cover.

    2. Attach the 4 clips to install the upper steering column cover onto the instrument cluster finish panel.

  3. INSTALL LOWER STEERING COLUMN COVER


    1. A01ERJD

      Attach the 2 claws to install the lower steering column cover.

      Note

      Do not damage the tilt and telescopic switch.

    2. Install the 3 screws.

      Torque:
      1.5 N*m  { 15 kgf*cm, 13 in.*lbf }