WIPER SWITCH INSPECTION


  1. INSPECT WINDSHIELD WIPER SWITCH ASSEMBLY (for LHD)


    1. A01ENRDE01

      Check the front wiper switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        E16-1 (+S) - E16-3 (+1) AUTO Below 1 Ω
        E16-10 (E) - E16-9 (AUTO)
        E16-1 (+S) - E16-3 (+1) Off
        E16-2 (+B) - E16-3 (+1) MIST
        LO
        E16-2 (+B) - E16-4 (+2) HI

        If the result is not as specified, replace the windshield wiper switch assembly.

    2. Check the front washer switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        E15-2 (EW) - E15-3 (WF) On Below 1 Ω
        Off 10 kΩ or higher

        If the result is not as specified, replace the windshield wiper switch assembly.

    3. A01ENRDE02

      Check the rear wiper switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        E15-2 (EW) - E15-6 (C1R) LO Below 1 Ω
        E15-2 (EW) - E15-7 (+1R) HI
        E15-2 (EW) - E15-6 (C1R) Off 10 kΩ or higher
        E15-2 (EW) - E15-7 (+1R)

        If the result is not as specified, replace the windshield wiper switch assembly.

    4. Check the rear washer switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        E15-2 (EW) - E16-5 (WR) On Below 1 Ω
        Off 10 kΩ or higher

        If the result is not as specified, replace the windshield wiper switch assembly.

  2. INSPECT WINDSHIELD WIPER SWITCH ASSEMBLY (for RHD)


    1. A01EQUBE01

      Check the front wiper switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        E16-4 (+S) - E16-2 (+1) AUTO Below 1 Ω
        E16-5 (E) - E16-6 (AUTO)
        E16-4 (+S) - E16-2 (+1) Off
        E16-3 (+B) - E16-2 (+1) MIST
        LO
        E16-3 (+B) - E16-1 (+2) HI

        If the result is not as specified, replace the windshield wiper switch assembly.

    2. Check the front washer switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        E15-2 (EW) - E15-1 (WF) On Below 1 Ω
        Off 10 kΩ or higher

        If the result is not as specified, replace the windshield wiper switch assembly.

    3. A01EQUBE02

      Check the rear wiper switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        E15-2 (EW) - E15-5 (C1R) LO Below 1 Ω
        E15-2 (EW) - E15-4 (+1R) HI
        E15-2 (EW) - E15-5 (C1R) Off 10 kΩ or higher
        E15-2 (EW) - E15-4 (+1R)

        If the result is not as specified, replace the windshield wiper switch assembly.

    4. Check the rear washer switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        E15-2 (EW) - E16-10 (WR) On Below 1 Ω
        Off 10 kΩ or higher

        If the result is not as specified, replace the windshield wiper switch assembly.