REAR WIPER MOTOR INSPECTION


  1. INSPECT REAR WIPER MOTOR ASSEMBLY


    1. A01EP6KE02

      Check the wiper operation.


      1. Apply battery voltage to the rear wiper motor and check if the rear wiper motor operates.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → Terminal 3 (+1)

        Battery negative (-) → Terminal 4 (E)

        		 Motor operates

        If the result is not as specified, replace the rear wiper motor assembly.

    2. Check the automatic stop position operation.


      1. Connect the battery positive (+) lead to terminal 3 (+1), and the negative (-) lead to terminal 1 (S) and terminal 4 (E). With the motor rotating, disconnect the negative (-) lead from terminal 1 (S) to stop the wiper motor operation at any position other than the matchmark.

      2. Check that the motor stops automatically at the matchmark.

        OK
        Motor stops automatically at the matchmark.

        If the result is not as specified, replace the rear wiper motor assembly.