OUTER MIRROR CONTROL ECU INSTALLATION

Tech Tips


  • Use the same procedures for LHD and RHD vehicles.

  • The procedures listed below are for LHD vehicles.


  1. INSTALL OUTER MIRROR CONTROL ECU ASSEMBLY

    A01EO0F

    1. Connect the 2 connectors.

    2. Install the outer mirror control ECU with the 2 screws.

  2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH


    1. Connect the connector.

    2. A01EO3L

      Connect the front door lock remote control cable assembly LH and front door inside locking cable assembly LH to the front door inside handle sub-assembly LH.

    3. A01EMZN

      Attach the 4 claws and 14 clips to install the front door trim board sub-assembly LH.

    4. Install the 2 screws.

  3. INSTALL FRONT UPPER ARMREST BASE PANEL LH


    1. Connect the connector.

    2. Attach the 5 claws to install the front upper armrest base panel LH.

  4. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG LH


    1. Attach the 3 claws to install the front door inside handle bezel plug LH.

  5. INSTALL FRONT LOWER DOOR FRAME BRACKET GARNISH LH


    1. Attach the clip and claw to install the front lower door frame bracket garnish LH.