OUTER MIRROR SWITCH REMOVAL

Tech Tips


  • Use the same procedures for LHD and RHD vehicles.

  • The procedures listed below are for LHD vehicles.


  1. REMOVE INSTRUMENT SIDE PANEL LH


    1. A01EN4GE01

      Place protective tape as shown in the illustration.

    2. Using a moulding remover, detach the 6 claws and remove the side panel.

  2. REMOVE NO. 1 SWITCH HOLE BASE


    1. A01EP0BE01

      Using a moulding remover, detach the 5 claws.

    2. Disconnect the 2 connectors and remove the switch hole base.

  3. REMOVE OUTER MIRROR SWITCH ASSEMBLY


    1. A01ENEJE02

      Remove the 3 screws and mirror switch.