FUEL LID LOCK CONTROL CABLE ASSEMBLY (for LHD) INSTALLATION


  1. INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY


    1. Connect the cable to the clamps shown in the illustration to install the cable.

      A01EN1M

  2. INSTALL FUEL FILLER OPENING LID LOCK RETAINER

    A01ERAT

    1. Install the lock retainer and turn it clockwise as shown in the illustration.

    2. A01ES73

      Install the cable to the retainer and turn it clockwise as shown in the illustration.

  3. INSTALL FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY


    1. A01ES96

      Connect the fuel lid lock control cable to the fuel lid lock open lever.

    2. Attach the 2 claws to install the fuel lid lock open lever.

  4. INSTALL NO. 1 WOOFER BOX SPEAKER ASSEMBLY (for 19 Speakers)


    1. Install the box speaker with the 5 bolts.

    2. A01ENTM

      Connect the connector.

  5. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH

    Click here

  6. INSTALL FRONT FLOOR CARPET ASSEMBLY

    Click here

  7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  8. CHECK SRS WARNING LIGHT

    Click here

  9. INSTALL ENGINE ROOM SIDE COVER LH


    1. Install the engine room side cover LH with the 7 clips.