POWER BACK DOOR TOUCH SENSOR INSTALLATION


  1. INSTALL POWER BACK DOOR SENSOR ASSEMBLY LH


    1. A01ENY5

      Attach the 2 clips to install the power back door sensor assembly LH.

    2. Using a T25 "TORX" wrench, install the 6 screws.

    3. A01ERB7

      Connect the connector.

  2. INSTALL POWER BACK DOOR SENSOR ASSEMBLY RH

    Tech Tips

    Use the same procedures described for the LH side.

  3. INSTALL BACK DOOR GARNISH


    1. A01EQR4

      Attach the 14 clips to install the back door garnish.

  4. INSTALL BACK DOOR SIDE GARNISH LH


    1. A01ER4G

      Attach the 3 clips to install the back door side garnish.

  5. INSTALL BACK DOOR SIDE GARNISH RH


    1. w/o Power Back Door:

      Tech Tips

      Use the same procedures described for the LH side.

    2. w/ Power Back Door:


      1. A01EPSU

        Attach the clip and 2 claws to install the back door side garnish.

  6. INSTALL CENTER BACK DOOR GARNISH


    1. A01ERXU

      Attach the 5 clips and 2 claws to install the back door garnish.

  7. INSTALL LOWER BACK DOOR STOPPER CUSHION


    1. A01ERBLE01

      Install the 2 back door stopper cushions with the 4 bolts.