HOOD LOCK CONTROL CABLE ASSEMBLY REMOVAL


  1. REMOVE ENGINE ROOM SIDE COVER LH


    1. Remove the 7 clips and engine room side cover LH.

      A01EN5SE01

  2. REMOVE ENGINE ROOM SIDE COVER RH


    1. Remove the 7 clips and engine room side cover RH.

      A01EPFTE01

  3. REMOVE UPPER RADIATOR SUPPORT SEAL


    1. A01ENLH

      Remove the 3 clips and upper radiator support seal.

  4. REMOVE FRONT FENDER MAIN SEAL LH (for LHD)


    1. A01ERY2

      Using a screwdriver, detach the 3 clips and remove the fender main seal.

      Tech Tips

      Tape the screwdriver tip before use.

  5. REMOVE FRONT FENDER MAIN SEAL RH (for RHD)


    1. A01EN05

      Using a screwdriver, detach the 3 clips and remove the fender main seal.

      Tech Tips

      Tape the screwdriver tip before use.

  6. REMOVE RADIATOR GRILLE ASSEMBLY


    1. A01EQD7E01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the radiator grille assembly.

    2. Remove the screw and 2 clips.

    3. Detach the 4 clips and partially remove the upper radiator seal.

    4. Detach the 14 claws and remove the radiator grille assembly.

    5. w/ Wide View Front Monitor System:

      Disconnect the connector.

  7. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System)


    1. A01EOHG

      Disconnect the sensor connector.

    2. Remove the 3 bolts and sensor.

  8. REMOVE HOOD LOCK CONTROL CABLE COVER


    1. A01EOO2E01

      Remove the 3 screws.

    2. Detach the claw and remove the cable cover.

  9. REMOVE HOOD LOCK NUT CAP


    1. A01ES92E01

      Using a screwdriver, remove the hood lock nut cap as shown in the illustration.

      Tech Tips

      Tape the screwdriver tip before use.

  10. REMOVE HOOD LOCK ASSEMBLY


    1. A01ENN9E01

      Remove the 2 bolts and nut.

    2. Remove the hood lock.

    3. Disconnect the connector.

    4. A01ERJSE01

      Disconnect the hood lock control cable.

  11. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    1. A01ES96

      Detach the 2 claws.

    2. Disconnect the hood lock control cable and remove the hood lock lever.

  12. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY (for LHD)

    A01EROX

    1. Using a screwdriver, disconnect the clamps shown in the illustration.

      Tech Tips

      Tape the screwdriver tip before use.

    2. Pull the cable from the engine room and remove it.

  13. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY (for RHD)

    A01EPCD

    1. Using a screwdriver, disconnect the clamps shown in the illustration.

      Tech Tips

      Tape the screwdriver tip before use.

    2. Pull the cable from the engine room and remove it.