POWER BACK DOOR TOUCH SENSOR REMOVAL


  1. REMOVE LOWER BACK DOOR STOPPER CUSHION


    1. A01ERBLE01

      Remove the 4 bolts and 2 lower back door stopper cushions.

  2. REMOVE CENTER BACK DOOR GARNISH


    1. A01ERXU

      Detach the 5 clips and 2 claws, and remove the back door garnish.

  3. REMOVE BACK DOOR SIDE GARNISH LH


    1. A01ER4G

      Detach the 3 clips and remove the back door side garnish.

  4. REMOVE BACK DOOR SIDE GARNISH RH


    1. w/o Power Back Door:

      Tech Tips

      Use the same procedures described for the LH side.

    2. w/ Power Back Door:


      1. A01EPSU

        Detach the clip and 2 claws and remove the back door side garnish.

  5. REMOVE BACK DOOR GARNISH


    1. A01EQR4

      Using a screwdriver, detach the 14 clips and remove the back door garnish.

  6. REMOVE POWER BACK DOOR SENSOR ASSEMBLY LH


    1. A01ERB7

      Disconnect the connector.

    2. A01ENY5

      Using a T25 "TORX" wrench, remove the 6 screws.

    3. Detach the 2 clips and remove the power back door sensor assembly LH.

  7. REMOVE POWER BACK DOOR SENSOR ASSEMBLY RH

    Tech Tips

    Use the same procedures described for the LH side.