SLIDING ROOF SYSTEM DATA LIST / ACTIVE TEST


  1. DATA LIST

    Tech Tips

    Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Sliding Roof / Data List.

    5. According to the display on the intelligent tester, read the Data List.

      Sliding Roof
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Open Switch Sliding roof switch open signal/ON or OFF

      ON: OPEN switch is pressed

      OFF: OPEN switch is not pressed

      		 -
      Close Switch Sliding roof switch close signal/ON or OFF

      ON: CLOSE switch is pressed

      OFF: CLOSE switch is not pressed

      		 -
      Up Switch Sliding roof switch tilt up signal/ON or OFF

      ON: UP switch is pressed

      OFF: UP switch is not pressed

      		 -
      Down Switch Sliding roof switch tilt down signal/ON or OFF

      ON: DOWN switch is pressed

      OFF: DOWN switch is not pressed

      		 -
      Hall IC1 Pulse Sliding roof operation signal/Lo or Hi

      Lo: Sliding roof motor is not operating

      Hi: Sliding roof motor is operating

      		 -
      Hall IC1 Status Sliding roof operation signal/Normal or Lock

      Normal: Sliding roof motor is operating

      Lock: Sliding roof motor is not operating

      		 -
      Hall IC2 Pulse Sliding roof operation signal/Lo or Hi

      Lo: Sliding roof motor is not operating

      Hi: Sliding roof motor is operating

      		 -
      Hall IC2 Status Sliding roof operation signal/Normal or Lock

      Normal: Sliding roof motor is operating

      Lock: Sliding roof motor is not operating

      		 -
      Ignition (Direct Signal) Engine switch signal/ON or OFF

      ON: Engine switch on (IG)

      OFF: Engine switch off

      		 -
      Ignition (MPX) Engine switch signal (MPX signal)/ON or OFF

      ON: Engine switch on (IG)

      OFF: Engine switch off

      		 -
      Door Courtesy Driver door courtesy light switch signal/ON or OFF

      ON: Driver door is open

      OFF: Driver door is closed

      		 -
      Door Handle Lock Button Entry lock switch/ON or OFF

      ON: Entry lock switch is pressed

      OFF: Entry lock switch is not pressed

      		 -
      Door Key Close Operation Key-linked sliding roof close signal/ON or OFF

      ON: Driver door key cylinder is turned to lock position using key

      OFF: Driver door key cylinder is not turned

      		 -
      Door Key Open Operation Key-linked sliding roof open signal/ON or OFF

      ON: Driver door key cylinder is turned to unlock position using key

      OFF: Driver door key cylinder is not turned

      		 -
      Wireless Open Operation Wireless sliding roof open signal/ON or OFF

      ON: Transmitter unlock switch is pressed

      OFF: Transmitter unlock switch is not pressed

      		 -
      Wireless Close Operation Wireless sliding roof close signal/ON or OFF

      ON: Transmitter lock switch is pressed

      OFF: Transmitter lock switch is not pressed

      		 -
      Key Off Permission Key-off operation permit signal/ON or OFF

      ON: Driver door is not closed within 45 sec. after engine switch is turned off

      OFF: Any status except "ON" status

      		 -
      Door Key Related (Open) Key-linked sliding roof open operation status/Avail or Not Avail

      Avail: Key-linked sliding roof open operation is available

      Not Avail: Key-linked sliding roof open operation is not available

      		 -
      Door Key Related (Close) Key-linked sliding roof close operation status/Avail or Not Avail

      Avail: Key-linked sliding roof close operation is available

      Not Avail: Key-linked sliding roof close operation is not available

      		 -
      Wireless Key Rel (Open) Transmitter-linked sliding roof open operation status/Avail or Not Avail

      Avail: Transmitter-linked sliding roof open operation is available

      Not Avail: Transmitter-linked sliding roof open operation is not available

      		 -
      Wireless Key Rel (Close) Transmitter-linked sliding roof close operation status/Avail or Not Avail

      Avail: Transmitter-linked sliding roof close operation is available

      Not Avail: Transmitter-linked sliding roof close operation is not available

      		 -
      Door Handle Button Close Entry lock switch-linked sliding roof close operation status/Avail or Not Avail

      Avail: Entry lock switch-linked sliding roof close operation is available

      Not Avail: Entry lock switch-linked sliding roof close operation is not available

      		 -
      Door Key Related Operation Direction for key-linked operation/Tilt or Slide

      Tilt: Key-linked sliding roof operation operates tilt up or down

      Slide: Key-linked sliding roof operation operates slide open or close

      		 -
      Wireless Key Rel Operation Direction for Transmitter-linked operation/Tilt or Slide

      Tilt: Transmitter-linked sliding roof operation operates tilt up

      Slide: Key-linked sliding roof operation operates slide open

      		 -
      Open Switch Failure(Past) OPEN switch failure signal (Past)/ON or OFF

      ON: OPEN switch failure signal (Past)

      OFF: No OPEN switch failure signal (Past)

      		 -
      Close Switch Failure(Past) CLOSE switch failure signal (Past)/ON or OFF

      ON: CLOSE switch failure signal (Past)

      OFF: No CLOSE switch failure signal (Past)

      		 -
      Up Switch Failure(Past) UP switch failure signal (Past)/ON or OFF

      ON: UP switch failure signal (Past)

      OFF: No UP switch failure signal (Past)

      		 -
      Down Switch Failure(Past) DOWN switch failure signal (Past)/ON or OFF

      ON: DOWN switch failure signal (Past)

      OFF: No DOWN switch failure signal (Past)

      		 -
      Open Switch Failure(Current) OPEN switch failure signal (Current)/ON or OFF

      ON: OPEN switch failure signal (Current)

      OFF: No OPEN switch failure signal (Current)

      		 -
      Close Switch Failure(Current) CLOSE switch failure signal (Current)/ON or OFF

      ON: CLOSE switch failure signal (Current)

      OFF: No CLOSE switch failure signal (Current)

      		 -
      Up Switch Failure(Current) UP switch failure signal (Current)/ON or OFF

      ON: UP switch failure signal (Current)

      OFF: No UP switch failure signal (Current)

      		 -
      Down Switch Failure(Current) DOWN switch failure signal (Current)/ON or OFF

      ON: DOWN switch failure signal (Current)

      OFF: No DOWN switch failure signal (Current)

      		 -
      Number of Trouble Codes Number of trouble codes / Min.: 0, Max.: 255 Number of DTCs will be displayed -

  2. ACTIVE TEST

    Tech Tips

    Using the intelligent tester to perform Active Tests allows relays, VSVs and actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Sliding Roof / Active Test.

    5. According to the display on the intelligent tester, perform the Active Test.

      Sliding Roof
      Tester Display Test Part Control Range Diagnostic Note
      Slide Roof Slide close/tilt up operation

      Clos/Up: Sliding roof slide close or tilt up operation occurs

      OFF: Sliding roof is not operating

      		 Be careful to avoid injuries as this test causes vehicle parts to move.
      Slide Roof Slide open/tilt down operation

      Open/Dwn: Sliding roof slide open or tilt down operation occurs

      OFF: Sliding roof is not operating

      		 Be careful to avoid injuries as this test causes vehicle parts to move.