ROOF HEADLINING INSTALLATION

Tech Tips

A bolt without a torque specification is shown in the standard bolt chart Click here.


  1. INSTALL NO. 2 MULTIPLEX NETWORK BODY ECU

    A01EPA6

    1. Install the multiplex network body ECU with the bolt.

    2. Connect the 2 connectors.

  2. INSTALL SIDE TRIM BOX (w/o Woofer)

    A01EP24

    1. Install the side trim box with the 9 screws.

  3. INSTALL SIDE TRIM BOX COVER (w/o Woofer)


    1. Install the side trim box cover.

  4. INSTALL QUARTER TRIM LID SUB-ASSEMBLY RH


    1. Install the quarter trim lid.

  5. INSTALL QUARTER TRIM COVER LH

    A01EQYE

    1. Attach the 6 clips to install the quarter trim cover.

  6. INSTALL FOLD SEAT SWITCH ASSEMBLY

    A01ENO7

    1. Attach the 6 clips to install the fold seat switch.

  7. INSTALL NO. 2 SIDE TRIM BASE COVER LH

    A01EOR7

    1. Attach the 4 claws to install the cover.

  8. INSTALL NO. 2 SIDE TRIM BASE COVER RH

    Tech Tips

    Use the same procedures described for the LH side.

  9. INSTALL NO. 1 SIDE TRIM BASE COVER LH

    A01EN8A

    1. Attach the 4 claws to install the cover.

  10. INSTALL NO. 1 SIDE TRIM BASE COVER RH

    A01ES58

    1. Attach the 4 claws to install the cover.

    2. A01EQ5W

      Install the duct with the 6 screws.

  11. INSTALL NO. 2 CUP HOLDER

    A01EQJK

    1. Attach the 3 claws to install the cup holder.

    2. Install the 5 screws.

  12. INSTALL NO. 1 CUP HOLDER

    A01ERQB

    1. Attach the 3 claws to install the cup holder.

    2. Install the 5 screws.

  13. INSTALL QUARTER TRIM COVER SUB-ASSEMBLY LH

    A01EQID

    1. Attach the 4 claws to install the quarter trim cover.

    2. Install the 7 screws.

    3. A01EN1D

      Install the duct with the 8 screws.

  14. INSTALL QUARTER TRIM COVER SUB-ASSEMBLY RH

    A01EN0H

    1. Attach the 4 claws to install the quarter trim cover.

    2. Install the 7 screws.

  15. INSTALL REAR NO. 2 SEAT SHOULDER BELT HANGER LH

    A01ESCSE01

    1. Install the hanger with new 2 spring nuts.

  16. INSTALL REAR NO. 2 SEAT SHOULDER BELT HANGER RH

    Tech Tips

    Use the same procedures described for the LH side.

  17. INSTALL REAR NO. 1 SEAT SHOULDER BELT HANGER

    A01EN8OE01

    Tech Tips

    Use the same procedure to install the hanger on the other side.


    1. Install the hanger with new 2 spring nuts.

  18. INSTALL ROOF SIDE INNER GARNISH COVER LH

    A01EN63

    1. Attach the 7 claws to install the cover.

  19. INSTALL ROOF SIDE INNER GARNISH COVER RH

    Tech Tips

    Use the same procedures described for the LH side.

  20. INSTALL REAR SHOULDER BELT ANCHOR PLATE SUB-ASSEMBLY LH

    A01ERRT

    1. Attach the 6 claws to install the plate.

  21. INSTALL REAR SHOULDER BELT ANCHOR PLATE SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedures described for the LH side.

  22. INSTALL FRONT SHOULDER BELT ANCHOR PLATE SUB-ASSEMBLY LH

    A01EOUN

    1. Slide the plate in the direction shown in the illustration and attach the 6 claws to install the plate.

  23. INSTALL FRONT SHOULDER BELT ANCHOR PLATE SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedures described for the LH side.

  24. INSTALL REAR DOOR SCUFF PLATE OUTSIDE LH

    A01EPV0

    1. Attach the 3 clips to install the rear door scuff plate outside.

  25. INSTALL REAR DOOR SCUFF PLATE OUTSIDE RH

    Tech Tips

    Use the same procedures described for the LH side.

  26. INSTALL FRONT DOOR SCUFF PLATE OUTSIDE LH

    A01ERJG

    1. Attach the 4 clips to install the front door scuff plate outside.

  27. INSTALL FRONT DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedures described for the LH side.

  28. INSTALL BACK DOOR WEATHERSTRIP

    A01ENJBE01

    1. Install the back door weatherstrip as shown in the illustration.

  29. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

    A01ERYGE01

    1. Install the rear door opening trim weatherstrip as shown in the illustration.

  30. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH

    Tech Tips

    Use the same procedures described for the LH side.

  31. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

    A01EQZ5E01

    1. Install the front door opening trim weatherstrip as shown in the illustration.

  32. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

    Tech Tips

    Use the same procedures described for the LH side.

  33. INSTALL ROOF HEADLINING ASSEMBLY

    A01ERIG

    Tech Tips


    • When installing the roof headlining, connect the cable to the negative (-) battery terminal and move the front seats and No. 1 rear seat to the position shown in the illustration.

    • After moving the seats, disconnect the cable from the negative (-) battery terminal.


    1. A01EOAA

      Place the headlining in the cabin from the rear of the vehicle as shown in the illustration.

      Note

      Be careful not to damage the roof headlining when placing it in the cabin.

    2. Attach the 2 guides, 12 claws, 2 clips and 16 fasteners to install the headlining.

      A01EOWNE01
    3. A01ESMRE01

      Connect the washer hose.

    4. A01EQUIE01

      Connect the antenna cord connector.

    5. A01EQ5RE01

      Connect the antenna cord connector and attach the 2 clamps.

    6. Install the bolt.

    7. A01EMXTE01

      Connect the 3 roof wire connectors and washer hose.

    8. Attach the 4 clamps.

    9. A01EP9P

      Connect the drive gear connector.

    10. A01EO3M

      Connect the rain sensor connector.

    11. A01EOCK

      Connect the inner mirror connector.

  34. INSTALL FRONT ROOF SIDE RAIL GARNISH LH

    A01EQK8E01

    1. Turn the end of the clip 90°with needle-nose pliers and connect it to the front roof side rail garnish LH.

      Tech Tips


      • Use the same procedure for the other clip.

      • Tape the tips of the needle-nose pliers before use.

    2. A01EMVEE01

      Attach the 3 clips to install the front roof side rail garnish LH.

  35. INSTALL FRONT ROOF SIDE RAIL GARNISH RH

    Tech Tips

    Use the same procedures described for the LH side.

  36. INSTALL 3RD SEAT ASSIST GRIP ASSEMBLY

    A01EQFY

    Tech Tips

    Use the same procedure to install the 3rd seat assist grip on the other side.


    1. Assemble the assist grip, 2 clips and 2 covers as shown in the illustration.

    2. Install the assist grip.

  37. INSTALL NO. 2 ASSIST GRIP ASSEMBLY LH

    A01ENVS

    1. Assemble the assist grip, 2 clips and 2 covers as shown in the illustration.

    2. Install the assist grip.

  38. INSTALL NO. 2 ASSIST GRIP ASSEMBLY RH

    Tech Tips

    Use the same procedures described for the LH side.

  39. INSTALL ASSIST GRIP ASSEMBLY

    A01EQFY

    Tech Tips

    Use the same procedure to install the assist grip on the other side.


    1. Assemble the assist grip, 2 clips and 2 covers as shown in the illustration.

    2. Install the assist grip.

  40. INSTALL SEAT BELT ANCHOR COVER

    A01ES8E

    1. Attach the 4 guides and 4 clips to install the seat belt anchor cover.

  41. INSTALL RAIN SENSOR COVER


    1. Push in the stopper in the direction of the arrow labeled (1) to install the rain sensor cover.

      A01EPEFE01

    2. Slide the No. 2 cover in the direction of the arrow labeled (2) to fix it in place.

  42. INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER


    1. Attach the 2 claws and temporarily install the inner rear view mirror stay holder cover.

    2. A01EOPO

      Slide the inner rear view mirror stay holder cover in the direction indicated by arrow shown in the illustration and attach the 2 claws to install the cover.

  43. INSTALL CENTER VISOR ASSEMBLY LH

    A01EQOM

    1. Attach the 2 clips to install the center visor.

  44. INSTALL CENTER VISOR ASSEMBLY RH

    Tech Tips

    Use the same procedures described for the LH side.

  45. INSTALL VISOR HOLDER

    A01EPH9

    Tech Tips

    Use the same procedures to install the visor holder on the other side.


    1. Attach the 2 claws.

    2. Push in the visor holder to install it.

  46. INSTALL VISOR ASSEMBLY LH

    A01EQA3

    1. Install the visor with the 2 screws.

  47. INSTALL VISOR ASSEMBLY RH

    Tech Tips

    Use the same procedures described for the LH side.

  48. INSTALL VISOR BRACKET COVER

    A01EPY8

    Tech Tips

    Use the same procedure to install the visor bracket cover on the other side.


    1. Attach the 4 claws to install the visor bracket cover.

  49. INSTALL NO. 3 ROOM LIGHT ASSEMBLY

    A01EORZ

    1. Install the 2 covers.

    2. A01EPFM

      Attach the 4 claws to install the room light lens.

    3. A01EQS1E01

      Attach the 4 claws to install the room light to the room light switch base.

    4. A01ES04

      Attach the 4 claws to install the room light.

  50. INSTALL NO. 1 ROOM LIGHT ASSEMBLY

    A01ESHJ

    1. Connect the connector.

    2. Attach the 4 clips to install the room light.

  51. INSTALL MAP LIGHT ASSEMBLY


    1. Connect the 2 connectors.

    2. Attach the 2 clips and 2 guides to install the map light.

    3. Install the 2 screws.

    4. Attach the 2 claws to close the 2 covers.

      A01EMZG

  52. INSTALL REAR UPPER PILLAR GARNISH LH

    A01EQMD

    1. Attach the 5 clips to install the rear upper pillar garnish.

    2. A01EPBT

      Install the seat belt shoulder anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }
    3. A01EMTD

      Attach the 2 claws to close the seat belt shoulder anchor cover.

  53. INSTALL REAR UPPER PILLAR GARNISH RH

    A01EOVD

    1. w/o Power Back Door:


      1. Attach the 5 clips to install the rear upper pillar garnish.

    2. A01EON9E01

      w/ Power Back Door:


      1. Pass the power back door rod through the rear upper pillar garnish.

      2. Attach the 5 clips to install the rear upper pillar garnish.

    3. A01EOVO

      Install the seat belt shoulder anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }
    4. A01EP2O

      Attach the 2 claws to close the seat belt shoulder anchor cover.

  54. INSTALL BACK DOOR SERVICE HOLE COVER RH (w/ Power Back Door)


    1. When reusing the power back door rod:


      1. A01ENFF

        Install the back door stay plate.

      2. A01ENC5E02

        Pass the power back door rod through the hole of the back door service hole cover and install the rod with the bolt.

        Torque:
        18 N*m  { 184 kgf*cm, 13 ft.*lbf }
      3. A01ENSXE01
        Text in Illustration
        *1 Power Back Door Rod
        *2 Hole of Back Door Service Hole Cover
        *a Back Door is Half-open

        Move the back door to a half-open position so that the hole in the center of the back door service hole cover is aligned lengthwise with the power back door rod.

      4. A01EPNA

        Attach the 2 clips and install the back door service hole cover.

        Note

        If the back door is in a fully-open position, the power back door rod will interfere with the hole of the back door service hole cover, so do not perform this operation with the back door in a fully open position.

    2. When installing a new power back door rod:


      1. A01ENFF

        Install the back door stay plate.

      2. A01EQI4

        Install the back door stay bolt.

        Torque:
        18 N*m  { 184 kgf*cm, 13 ft.*lbf }
      3. A01ESOW

        Attach the 2 clips to install the service hole cover.

      4. A01EOUD

        Attach the ball joints to install the power back door rod.

  55. INSTALL BACK DOOR SIDE GARNISH RH (w/ Power Back Door)


    1. w/o Power Back Door:

      Tech Tips

      Use the same procedures described for the LH side.

    2. w/ Power Back Door:


      1. A01EPSU

        Attach the clip and 2 claws to install the back door side garnish.

  56. INSTALL CENTER BACK DOOR GARNISH (w/ Power Back Door)


    1. A01ERXU

      Attach the 5 clips and 2 claws to install the back door garnish.

  57. INSTALL REAR FRONT QUARTER TRIM GARNISH LH

    A01ES5Y

    1. Pass the seat belt anchor through the quarter trim garnish.

    2. Attach the clip and 2 guides to install the quarter trim garnish.

    3. Install the screw.

  58. INSTALL REAR FRONT QUARTER TRIM GARNISH RH

    Tech Tips

    Use the same procedures described for the LH side.

  59. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH

    A01ERFB

    Tech Tips

    When installing the front quarter trim panel, operate the reclining adjuster release handle and move the No. 1 rear seat to the position shown in the illustration.


    1. Connect the thermistor connector.

    2. Attach the 19 clips and 2 claws to install the quarter trim panel.

    3. Install the clip.

      A01ENWJ
    4. A01EQO3E02

      Install the rear No. 2 seat belt anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not overlap the anchor part of the seat belt and protruding parts of the vehicle body.

    5. A01EOE1

      Install the rear No. 1 seat belt anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }
    6. A01ESN6

      Attach the 3 claws to install the cover.

  60. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH

    A01ENK2

    Tech Tips

    When installing the front quarter trim panel, operate the reclining adjuster release handle and move the No. 1 rear seat to the position shown in the illustration.


    1. Connect the thermistor connector.

    2. Attach the 17 clips and 2 claws to install the quarter trim panel.

    3. Install the clip.

      A01EREO
    4. A01EQD8

      Install the rear No. 2 seat belt anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }
    5. A01ES5O

      Attach the 3 claws to install the cover.

    6. A01EPT5

      Install the rear No. 1 seat belt anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }
    7. A01EOL1

      Attach the 3 claws to install the cover.

  61. INSTALL CENTER PILLAR GARNISH LH

    A01EP32

    1. Pass the seat belt anchor through the center pillar garnish.

    2. Attach the 2 clips and 2 guides to install the center pillar garnish.

    3. Install the bolt.

  62. INSTALL CENTER PILLAR GARNISH RH

    Tech Tips

    Use the same procedures described for the LH side.

  63. INSTALL REAR ASSIST GRIP ASSEMBLY

    A01ERXY

    Tech Tips

    Use the same procedure to install the rear assist grip on the other side.


    1. Attach the 2 claws to install the rear assist grip.

    2. Install the 2 bolts.

    3. A01EPZ8

      Attach the 4 claws to install the 2 assist grip plugs.

  64. INSTALL CENTER LOWER PILLAR GARNISH LH

    Tech Tips


    • When installing the center lower pillar garnish, connect the cable to the negative (-) battery terminal and operate the power seat switch to move the front seat and seatback to the foremost upright position.

    • After moving the front seat, disconnect the cable from the negative (-) battery terminal.


    1. A01EOZX

      Attach the 2 claws and 7 clips to install the center lower pillar garnish.

    2. A01EPOZ

      Install the seat belt anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  65. INSTALL CENTER LOWER PILLAR GARNISH RH

    Tech Tips

    Use the same procedures described for the LH side.

  66. INSTALL CENTER PILLAR GARNISH COVER LH

    Tech Tips


    • When installing the center pillar garnish cover, connect the cable to the negative (-) battery terminal and operate the power seat switch to move the front seat and seatback to the foremost upright position.

    • After moving the front seat, disconnect the cable from the negative (-) battery terminal.


    1. A01EPVK

      Attach the 2 clips and 2 guides to install the cover.

  67. INSTALL CENTER PILLAR GARNISH COVER RH

    Tech Tips

    Use the same procedures described for the LH side.

  68. INSTALL FRONT PILLAR GARNISH LH

    A01ENLZ

    1. Connect the speaker connector.

    2. Attach the clip and 3 guides to install the front pillar garnish.

  69. INSTALL FRONT PILLAR GARNISH RH

    Tech Tips

    Use the same procedures described for the LH side.

  70. INSTALL FRONT ASSIST GRIP SUB-ASSEMBLY

    A01EQ8Y

    Tech Tips

    Use the same procedure to install the front assist grip on the other side.


    1. Attach the 2 claws to install the front assist grip.

    2. Install the 2 bolts.

    3. A01EPTJ

      Attach the 4 claws to install the 2 assist grip plugs.

  71. INSTALL REAR FLOOR MAT REAR SUPPORT PLATE

    A01EQA6

    1. Attach the 6 clips and 4 claws to install the support plate.

  72. INSTALL REAR DOOR SCUFF PLATE LH

    A01EN6Q

    1. w/o Illumination Type Front Door Scuff Plate:


      1. Attach the 3 claws and 4 clips to install the scuff plate.

      2. Install the screw.

    2. A01ERAD

      w/ Illumination Type Front Door Scuff Plate:


      1. Attach the 3 claws and 4 clips to install the scuff plate.

      2. Install the screw.

  73. INSTALL REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedures described for the LH side.

  74. INSTALL REAR STEP COVER

    Tech Tips

    Use the same procedure to install the step cover on the other side.


    1. A01EQ9D

      w/o Illumination Type Front Door Scuff Plate:

      Attach the 2 claws to install the step cover.

    2. A01EQ94

      w/ Illumination Type Front Door Scuff Plate:

      Attach the 4 claws to install the step cover.

  75. INSTALL FRONT DOOR SCUFF PLATE LH

    A01EQ14

    1. w/o Illumination:


      1. Attach the 7 claws and 4 clips to install the scuff plate.

    2. A01EOWQ

      w/ Illumination:


      1. Connect the connector.

      2. Attach the 7 claws and 4 clips to install the scuff plate.

  76. INSTALL FRONT DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedures described for the LH side.

  77. INSTALL REAR NO. 2 SEAT ASSEMBLY LH


    1. Install the rear No. 2 seat assembly LH Click here.

  78. INSTALL REAR NO. 2 SEAT ASSEMBLY RH

    Tech Tips

    Use the same procedures described for the LH side.

  79. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  80. INSTALL ENGINE ROOM SIDE COVER LH


    1. Install the engine room side cover LH with the 7 clips.