ROOF HEADLINING DISASSEMBLY


  1. REMOVE NO. 2 AIR OUTLET GRILLE ASSEMBLY

    A01ERQ7

    Tech Tips

    Use the same procedures to remove the air outlet grille on the other side.


    1. Detach 6 claws and remove the air outlet grille.

  2. REMOVE NO. 1 AIR OUTLET GRILLE ASSEMBLY

    Tech Tips

    Use the same procedures described for the No. 2 air outlet grille.

  3. REMOVE NO. 1 ROOF SILENCER PAD

    A01ENED

    1. Remove the roof silencer pad.

  4. REMOVE NO. 4 ROOF SILENCER PAD

    A01EOBN

    1. Remove the roof silencer pad.

  5. REMOVE NO. 1 ROOF WIRE


    1. Turn the visor connectors approximately 90° clockwise and remove them from the roof headlining.

    2. Remove the 6 pieces of tape from the roof headlining.

    3. Detach each clamp, and remove the roof wire and washer hose.

    4. Remove the double-sided tape remaining on the headlining.

      A01EP1LE02
  6. REMOVE ANTENNA CORD SUB-ASSEMBLY


    1. Detach the 2 clamps and remove the antenna from the 3 ribs and notch on the rear of the roof headlining.

      A01ENYF
    2. Remove the antenna cord from the roof headlining.

    3. Remove the double-sided tape from the roof headlining.