FRONT CONSOLE BOX (w/o Cool Box) INSTALLATION

Tech Tips

A bolt without a torque specification is shown in the standard bolt chart Click here.


  1. INSTALL REAR CONSOLE BOX SUB-ASSEMBLY

    A01EORS

    1. Attach the 2 claws.

    2. Install the console box with the 4 bolts and 2 screws.

  2. INSTALL REAR CONSOLE END PANEL SUB-ASSEMBLY


    1. A01EQRB

      Connect the connectors and 3 clamps.

    2. Attach the 6 claws to install the end panel.

  3. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. A01ENG7

      Connect the connectors.

    2. Attach the 13 claws to install the console panel.

  4. INSTALL CONSOLE CUP HOLDER BOX SUB-ASSEMBLY


    1. A01EPMF

      Attach the 4 claws to install the box.

  5. INSTALL PARKING BRAKE HOLE COVER


    1. A01EOWR

      Attach the 6 claws to install the cover.

  6. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    1. A01EQSF

      Connect the connectors.

    2. Attach the 8 claws to install the panel.

  7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A01EN46

      Install the shift lever knob and twist it in the direction indicated by the arrow.

  8. INSTALL INNER NO. 1 INSTRUMENT PANEL BRACKET COVER RH


    1. A01EO0O

      Attach the clip to install the cover.

  9. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH


    1. A01EP7O

      Attach the 9 claws to install the panel pad.

  10. INSTALL INNER NO. 1 INSTRUMENT PANEL BRACKET COVER LH


    1. A01ER40

      Attach the clip to install the cover.

    2. Install the clip.

  11. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH


    1. A01EO0Q

      Connect the connector.

    2. Attach the 8 claws to install the panel pad.