FRONT CONSOLE BOX (w/o Cool Box) REMOVAL


  1. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH


    1. A01EO0Q

      Detach the 8 claws.

    2. Disconnect the connector and remove the panel pad.

  2. REMOVE INNER NO. 1 INSTRUMENT PANEL BRACKET COVER LH


    1. A01ER40

      Remove the clip.

    2. Detach the clip and remove the cover.

  3. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH


    1. A01EP7O

      Detach the 9 claws and remove the panel pad.

  4. REMOVE INNER NO. 1 INSTRUMENT PANEL BRACKET COVER RH


    1. A01EO0O

      Detach the clip and remove the cover.

  5. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A01ENTE

      Twist the shift lever knob in the direction indicated by the arrow and remove it.

  6. REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    1. A01EQSF

      Detach the 8 claws.

    2. Disconnect the connectors and remove the panel.

  7. REMOVE PARKING BRAKE HOLE COVER


    1. A01EOWR

      Detach the 6 claws and remove the cover.

  8. REMOVE CONSOLE CUP HOLDER BOX SUB-ASSEMBLY


    1. A01EPMF

      Detach the 4 claws and remove the box.

  9. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. A01ENG7

      Detach the 13 claws.

    2. Disconnect the connectors and remove the console panel.

  10. REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY

    A01ESG6E01

    1. Place protective tape as shown in the illustration.

    2. Using a moulding remover, detach the 6 claws.

    3. Remove the end panel and disconnect the connectors and 3 clamps.

  11. REMOVE REAR CONSOLE BOX SUB-ASSEMBLY

    A01EORS

    1. Remove the 4 bolts and 2 screws.

    2. Detach the 2 claws and remove the console box.