INSTRUMENT PANEL SAFETY PAD REASSEMBLY

Tech Tips

A bolt without a torque specification is shown in the standard bolt chart Click here.


  1. INSTALL ANTENNA CORD SUB-ASSEMBLY


    1. Attach the 7 clamps to install the antenna cord.

      A01EPYL

  2. INSTALL NO. 2 INSTRUMENT PANEL WIRE (for LHD)


    1. Attach the wire to the clamps to install the wire to the instrument panel.

      A01ERV1

  3. INSTALL NO. 2 INSTRUMENT PANEL WIRE (for RHD)


    1. Attach the wire to the clamps to install the wire to the instrument panel.

      A01ESL5

  4. INSTALL NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System)


    1. for LHD:


      1. A01EOPC

        Install the antenna with the 2 screws.

      2. Attach the 2 clamps.

    2. for RHD:


      1. A01EO9G

        Install the antenna with the 2 screws.

      2. Attach the 2 clamps.

  5. INSTALL NO. 2 SIDE DEFROSTER NOZZLE


    1. A01EOSR

      Attach the 2 claws to install the nozzle.

  6. INSTALL NO. 1 SIDE DEFROSTER NOZZLE


    1. A01EOEL

      Attach the 2 claws to install the nozzle.

  7. INSTALL DEFROSTER NOZZLE ASSEMBLY


    1. A01EQH7

      Attach the 11 claws to install the nozzle.

  8. INSTALL FRONT PASSENGER SIDE AIRBAG ASSEMBLY


    1. A01EN3WE01

      Attach the 5 hooks (A).

    2. Attach the 5 hooks (B) to install the front passenger airbag on the instrument panel.

    3. A01EQ80

      Install the 2 screws.

    4. A01ER1B

      Connect the 2 connectors and install the instrument panel wire assembly to the front passenger airbag.

      Note

      When handling the airbag connector, take care not to damage the airbag wire harness.

    5. Attach the claw and install the wire.

  9. INSTALL REAR NO. 1 AIR DUCT


    1. A01EQ8I

      Install the duct with the 2 screws.

  10. INSTALL CENTER HEATER TO REGISTER DUCT


    1. A01EQ5E

      Install the duct with the 3 screws.