AFS OFF SWITCH INSPECTION


  1. INSPECT COMBINATION SWITCH ASSEMBLY


    1. A01ES6JE03
      Text in Illustration
      *a

      Component without harness connected

      (Combination Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      16 (MSW) - 12 (GND) AFS off switch OFF 10 kΩ or higher
      AFS off switch ON Below 1 Ω

    2. Apply battery voltage to the connector, and check the LED illumination condition.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 3 (ILL+)

      Battery negative (-) → Terminal 5 (ILL-)

      		 LED illuminates

      If the result is not as specified, replace the combination switch assembly.