BACK-UP LIGHT ASSEMBLY REMOVAL

Tech Tips


  • Use the same procedures for the RH side and LH side.

  • The procedures listed below are for the LH side.


  1. REMOVE REAR FLOOR MAT SUPPORT PLATE REAR

    A01EQA6

    1. Detach the 6 clips and 4 claws, and remove the support plate.

  2. REMOVE BACK DOOR TRIM COVER LH


    1. A01EPG0

      Remove the back door trim cover LH as shown in the illustration.

  3. REMOVE BACK DOOR TRIM COVER RH


    1. A01EPD4E01

      Remove the back door trim cover RH as shown in the illustration.

  4. REMOVE BACK DOOR TRIM PANEL ASSEMBLY


    1. A01ER36

      Remove the 4 bolts.

    2. Detach the 16 clips and remove the back door trim panel.

  5. REMOVE BACK-UP LIGHT LENS AND BODY LH


    1. A01EQK6

      Remove the 2 screws and bracket.

    2. A01EQA8

      Detach the clip and disconnect the connector.

    3. Remove the 3 screws and light lens and body.