REAR LIGHT ASSEMBLY INSPECTION


  1. INSPECT REAR LIGHT ASSEMBLY LH


    1. A01EN84E06
      Text in Illustration
      *a

      Component without harness connected:

      (Rear Light Assembly LH)

      Apply battery voltage to the terminals of the connector, and check the LED illumination condition.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 3

      Battery negative (-) → Terminal 1

      		 Light illuminates

      If the result is not as specified, replace the rear light assembly LH.

  2. INSPECT REAR LIGHT ASSEMBLY RH


    1. A01EN84E06
      Text in Illustration
      *a

      Component without harness connected:

      (Rear Light Assembly RH)

      Apply battery voltage to the terminals of the connector, and check the LED illumination condition.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 3

      Battery negative (-) → Terminal 1

      		 Light illuminates

      If the result is not as specified, replace the rear light assembly RH.