REAR COMBINATION LIGHT ASSEMBLY INSTALLATION

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. INSTALL REAR TURN SIGNAL LIGHT BULB


    1. A01ESA0

      Install the rear turn signal light bulb to the socket.

    2. Turn the socket in the direction indicated by the arrow in the illustration to install the socket and rear turn signal light bulb.

  2. INSTALL REAR COMBINATION LIGHT GASKET LH


    1. Install a new rear combination light gasket.

  3. INSTALL REAR COMBINATION LIGHT ASSEMBLY LH


    1. Connect the connector.

    2. Attach the 2 clips and install the rear combination light assembly LH.

    3. Install the 2 bolts.

    4. Attach the 6 claws and install the 2 covers.