REAR COMBINATION LIGHT ASSEMBLY INSPECTION

INSPECT REAR COMBINATION LIGHT ASSEMBLY LH

1. 

   Text in Illustration

   *a	Component without harness connected: (Rear Combination Light Assembly LH)

   Check the stop light.

   
   

   1. Apply battery voltage to the connector, and check the LED illumination condition.

      OK
      Measurement Condition Specified Condition Battery positive (+) → 5 (STP) Battery negative (-) → 3 (E) Light illuminates

      If the result is not as specified, replace the rear combination light assembly LH.

2. 

   Text in Illustration

   *a	Component without harness connected: (Rear Combination Light Assembly LH)

   Check the taillight.

   
   

   1. Apply battery voltage to the connector, and check the LED illumination condition.

      OK
      Measurement Condition Specified Condition Battery positive (+) → 6 (TL) Battery negative (-) → 3 (E) Light illuminates

      If the result is not as specified, replace the rear combination light assembly LH.

INSPECT REAR COMBINATION LIGHT ASSEMBLY RH

1. 

   Text in Illustration

   *a	Component without harness connected: (Rear Combination Light Assembly RH)

   Check the stop light.

   
   

   1. Apply battery voltage to the connector, and check the LED illumination condition.

      OK
      Measurement Condition Specified Condition Battery positive (+) → 5 (STP) Battery negative (-) → 3 (E) Light illuminates

      If the result is not as specified, replace the rear combination light assembly RH.

2. 

   Text in Illustration

   *a	Component without harness connected: (Rear Combination Light Assembly RH)

   Check the taillight.

   
   

   1. Apply battery voltage to the connector, and check the LED illumination condition.

      OK
      Measurement Condition Specified Condition Battery positive (+) → 6 (TL) Battery negative (-) → 3 (E) Light illuminates

      If the result is not as specified, replace the rear combination light assembly RH.